|
 |
| Save water. Save time. Save energy. SORRY WE ARE OUT OF STOCK, HOPEFULLY WE CAN RESOLVE. BUT UNTIL THEN WE CAN'T SUPPLY |
Until now, accurately measuring the amount of water to be boiled in your kettle has been all but impossible. The result? It is estimated that, on average, we boil twice the volume of water needed every time. Which means twice as much energy, twice as much time.
With a 3kW kettle that’s the same as wasting the energy of around 50 light bulbs!
Your new ECO Kettle is different: the internal reservoir holds a full capacity of water ready for use, while the measuring button allows any quantity – from a single cupful to full capacity – to be released into the separate chamber for boiling.
The result? Exactly the right amount of water every time you boil –and no more waste.
In UK consumer trials directed by the Energy Saving Trust, the ECO Kettle used an average of 31% less energy then normal kettles.
To take full advantage of the potential of your new ECO Kettle, please take time to read and follow the instructions in this booklet, which will explain how the Eco Friendly Technology works, and how best to care for your new product.
Please pay particular attention to the section dealing with IMPORTANT SAFEGUARDS, and keep this booklet in a safeplace for future reference.
Carefully unpack the ECO Kettle and its power base, and remove all packaging materials. Study the illustrations in this booklet to identify the various parts of the ECO Kettle, and then follow these operating instructions.
Before first use, boil a full volume of water and discard to ensure that the interior of the ECO kettle is completely clean.
The ECO kettle is supplied with some of the mains cable stowed in the Power Base. The cable can simply be lengthened by releasing it from the clips.
Every kettle is boil tested as part of our quality assurance procedures and this may leave small drops of water inside the Reservoir and Boiling Chamber. BUY NOW
|
 |
Operation
Check that the Valve Button is in the raised position, pull back the Latch, and then open the hinged lid.
Fill the main Reservoir to the MAXIMUM level and close the lid using a small downward pressure to ensure that the Latch engages fully.
Place the ECO Kettle on its Power Base and plug in the Power Cord to a standard domestic power socket and switch on.
You are now ready to decide how much water you wish to boil – from one cup to the full kettle!
To deliver water to the Boiling Chamber, press the Valve Button until water flows into the Boiling Chamber. Watch the
water level rise in the front window until it reaches the required mark.
When the valve button is released the valve closes and the water in the Boiling Chamber is ready to boil.
Always ensure there is enough water to reach the Min Fill mark (approximately 1 cup = 200ml).
Never fill above the Max Boil mark on the Boiling Chamber window as water may be ejected during boiling.
Switch the ECO Kettle ON by pressing down the On/Off Switch. The Indicator Light will illuminate to indicate the ECO Kettle is ON.
When the water has boiled, the ECO Kettle will switch OFF automatically. The water can be brought back to the boil by operating the On/Off switch again. It may be necessary to wait a few seconds before the switch can be reset.
Do not hold the switch in the ON position as this will damage the mechanism.
You can simply stop the boiling process at any time by operating the On/Off Switch to the OFF position.
If at any time you wish to boil all of the water in the kettle – including the water contained in the reservoir – simply lock the valve open by rotating the valve button in the direction of the arrow when the button is depressed. Do not leave the valve in the locked position as this will prevent your ECO Kettle from saving energy and may make the lid seal less effective.
Generally, Valve Open is useful for larger quantities above 1 litre, and Valve Closed is suitable for smaller quantities – 1 to 5 cups (200ml to 1 litre).
If the ECO Kettle is inadvertently operated without water in the Boiling Chamber an automatic cut out will operate to protect your ECO Kettle. This can simply be re-set as follows: cool the heating element by releasing water from the reservoir into the boiling chamber. Wait for a short time for the control to cool sufficiently and the ECO Kettle will then be ready for use again.
And remember, unused water remaining in the Reservoir is available for use next time – saving water, time and energy!
Top up the Reservoir to the Maximum level from time to time as necessary, so that your ECO Kettle is always ready to boil the exact amount of water you require.
To ensure the water in your ECO Kettle does not get stale, start each day by discarding any remaining water and refilling with fresh. |
 |
Caring for your ECO Kettle
The ECO Kettle is provided with a removable filter in the spout to remove limescale etc. If it becomes clogged, remove and clean under running water. To maintain optimum performance, it will be necessary from time to time to clean the ECO Kettle to remove limescale deposits. This can be achieved simply by using a proprietary cleaner made specially for plastic bodied kettles, and following the makers instructions. The outside of your ECO kettle should be kept clean using a damp, soft cloth.
Never immerse the ECO kettle or its power base in water. |
 |
| Safety |
This is a High Power Fast Boiling Device.
Always pour water from your ECO Kettle carefully. Wait at least five seconds after the kettle switches off for the boiling to subside and, after pouring, return the kettle to its upright position slowly. In some circumstances, if you are too hasty, you may find that a little water will eject from the spout if the water inside is still vigorously boiling.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Warning. Do not open the lid while the kettle is boiling.
• Caution: Ensure that the kettle is switched off before removing it from its power base.
• The appliance must not be immersed.
• If the kettle is overfilled, boiling water may be ejected.
• The kettle must only be used with the power base provided.
• Do not use in a bathroom or outdoors.
• Do not use the kettle for anything other than boiling water.
• Always pour boiled water from the kettle slowly and carefully.
• Do not hold the switch in the ON position, or otherwise interfere with its normal operation.
• Always use the kettle on a flat, firm surface. |
|
